Nora Lighting - LED Tape lightsNora Lighting's website

 

 

Standard LED Tape Lights (NUPT1 Series)

  Applications include cove lighting, building facades, bars
   and lounges, displays, accent lighting, home theaters,
   undercabinet lighting and more

  Energy efficient

  Very low profile - ⁷/₁₆" wide and ¹/₁₆" thick

  Designed to cast no shadows

  Seamless glow

  Available in a roll or kit

  Separable every 20" - easily disconnected and connected without soldering

  Field cuttable - every 4" or 6 LEDs

  24 Watts per roll - 1.5W per foot

  Available in 6 colors - red, blue, green, yellow, warm white (3000K), cool white
  (4200K)

  65 Lumens per foot with 3000K CCT

  No UV light or infrared wavelengths

  Easy to install - pre-applied 3M™ tape or 15
   acrylic mounting clips (included with
   roll/kit). New plastic channels available for
   rigidity

  New 16' roll with 12" sections

  Dimmable with Dimmable Power Supply

  ETL Listed for Wet Location

  IP65 rated   

  California Title 24 compliant

  LED Tape Light Brochure (pdf, 1.52 MB)

  LED Standard Tape Light Kit Specs (pdf, 892 KB)

 

 

Standard Output LED Tape Lights

Tape	Size	Contents
Specify color: 30=3000K, 42=4200K, B=blue, G=green, R=red, Y=yellow
NUTP1-16LED(color)	16.6' Roll (Ten 20" sections)	1) 16.4' Roll (15) Clear Acrylic clips (2) Shrink Wrap Tubes [NATL-400] (1) 9" Power Line Interconnector [NATL-509]
NUTP1-LED(color)/12	12" Section with male & female ends	(1) 12" Section (2) Shrink Wrap Tubes [NATL-400]
NUTP1-LED(color)/4	4" Section with male & female ends	(1) 4" Section (2) Shrink Wrap Tubes [NATL-400]
NUTP1-16LED30PS	16.6' 3000K Kit including Plug-In Driver	(1) 3000K Tape Light roll [NUTP1-16LED30] (15) Clear Acrylic clips with screws (5) Shrink Wrap Tubes [NATL-400] (1) 9" Power Line Interconnector [NATL-509] (1) 24W Direct Plug-in Driver [NATL-524].

 

 

 

High Output LED Tape Lights (NUPT2 Series)

  Designed for installation in discreet locations or
   hard-to-access shelves and corners

  Commonly used for cove lighting, in display or kitchen
   cabinets, within book shelves or desktops – or in any
   architectural niche that requires a hidden, dramatic light
   source

  Ideal lighting solution for trade show displays and exhibits

  High Output LED tape light has four times the light output using only three times
  the energy of Nora's standard tape

  Separable every 12" - easily disconnected and connected without soldering

  Flexible - easy solderless installation with 12" and 4" sections

  Pre-applied 3M™ Tape or clips for mounting

  Field cuttable - every 4" or 6 LEDs

  64 Watts per roll - over 4W per foot

  288 LEDs per roll - 18 LEDs per foot

  120° beam angle

  205 lumens per foot

  Maximum run - 1 roll (16')

  Dimmable with Dimmable Power Supply

  Colors available: 3000K Warm White (30), 4200K Cool White (42), Blue (B),
   Green (G), Red (R), Yellow (Y)

  ETL Listed for Wet Location

  IP65 rated

  California Title 24 compliant

  LED Tape Light Brochure (pdf, 1.52 MB)

 

 

High Output LED Tape Lights

Tape	Size	Contents
Specify color: 30=3000K, 42=4200K, B=blue, G=green, R=red, Y=yellow
NUTP2-16LED(color)	16' Roll (Sixteen 12" connected and sealed sections)	(1) 16' Roll (15) Clear Acrylic clips (2) Shrink Wrap Tubes [NATL-400] (1) 9" Power Line Interconnector [NAHO-609]
NUTP2-LED(color)/12	12" Section with male & female ends	(1) 12" Section (2) Shrink Wrap Tubes [NATL-400]
NUTP2-LED(color)/4	4" Section with male & female ends	(1) 4" Section (2) Shrink Wrap Tubes [NATL-400]

 

 

 

RGB Color Changing LED Tape Lights (NUPT3 Series)

  Perfect solution for applications that require
  a concealed linear lighting system and
  consistent smooth transitions of colors

  Primary colors - Red, Green, Blue and
   several colors of the visual spectrum can be
   selected and programmed

  16' roll that consists of sixteen 12" sections
   linked together

  Separable every 12" - easily disconnected
   and connected without soldering

  Cuttable every 6" and it does not affect
   circuit (shrink wrap tube included to
   conceal the cut)

  9 LEDs at 2.5W power consumption per foot

  192 LEDs at 40W per roll

  Available with 3 in 1 SMD LEDs and 120° viewing angle

  Maximum run is 2 rolls or 32'

  Operating temperatures -13°F to 140°F

  Maximum run - 2 rolls (32').

  Synchronization- Multiple RGB runs can be synchronized to change simultaneously

  Change the color, the intensity of a color or select an auto changing fade or
   strobe at the press of a button

  ETL Listed for Wet Location

  IP65 rated

  LED Tape Light Brochure (pdf, 1.52 MB)

 

 

RGB Color Changing LED Tape Light

Tape	Size	Contents
NUTP3-16LEDRGB	16' Roll (Sixteen 12" connected and sealed sections)	(1) 16' Roll (15) Clear Acrylic clips (2) Shrink Wrap Tubes [NATL-400] (1) 12" Power Line Interconnector [NARGB-710]
NUTP3-LEDRGB/12	12" Section with male & female ends	(1) 12" Section (2) Shrink Wrap Tubes [NATL-400]
NUTP2-LEDRGB/6	6" Section with male & female ends	(1) 6" Section (2) Shrink Wrap Tubes [NATL-400]

 

 

 

Nora has several lighting products. Only selected products are featured here. For information on additional Nora products please check Nora Lighting's website or request information from ESA.